FERRO-PLAST
VIA DON COMOTTI 7
24050 LURANO (BG) - Italy
Tel. +390227409415 - Fax +390227409420
E-mail: pagliara@pagliara.it
VAT Number 02916110964
HOME
THE COMPANY
PRODUCTS
NEWS
ASSISTANCE
QUALITY
CONTACT US
OUR LOCATION
 
Products Catalogue >> Ferrocling


Ferrocling: Cling Agent
 
Cling Agent
 
FERROCLING PW 60 is a concentrate of high molecular weight Polyisobutylene tackifler in Linear Low Density Polyethylene.
It is used as a cling agent to make stretchwrap films from LLDPE or LDPE.
It is a dry free-flowing pellet
 
Typical Physical Properties

Appearance

Lightly powdered opaque dry pellets

 

% PIB

57-63

 

Specific Gravity

0.912

MO13-700*

Bulk Density (g/cm3)

0.912

MO28-700*


* manufacturer's internal method
 

FERROCLING PW 60 is designed to produce stretch film from LLDPE, LDPE or other polyolefins for the applications of palletwrap, silagewrap and foodwrap. It can be used in both blown or cast film process.
Polymers used with FERROCLING PW 60 must not contain any slip or antiblock additives or have a density higher than 0.923 as this will prevent the migration of the cling additive.
Migration time for good cling properties ís 24-72 hours.

 
Recommended Addition Rates
  • For monolayer blown films 8 % FERROCLING PW 60 by weight should be added to LLDPE (or resin mix).
  • For monolayer cast films 3 and 4 % FERROCLING PW 60.
  • On multilayer film lines, FERROCLING PW 60 is often added to the skin layers only.

Addition rate depends on which layer is used and the layer thickness.

 
Food Contact Status
Polyisobutylene is allowed by the FDA for use in contact with food (21 CFR 117,1430) and also meets the requirements of EC Directive 90/128/EEC.
 

Packaging & Storage

Product is packed in 25 kg PE bags on 1375 kg shirinkwrapped pallets.
Store in cool place (less than 30°C) out of direct sunlight and not under heavy loads.
Shelf life 9 months minimum.




Ferrocling PW 60 is a concentrate of high molecular weight Polyisobutylene tackifier in LDPE for stretch film.
     PRIVACY